Temperature Sensor TTC-05
 

HealthLab Temperature Sensor TTC-08 - Micro Plug Connector

Within the scope of measurements with the psycho physiological monitoring system
HealthLab, the continuous temperature sensor TTC-08 is used for the non-invasive detection
of the body core temperature of a subject, e.g. with the HealthLab HFM-05 ANT+ in
conjunction with the HealthLab Tcore™* ANT+ radio module TCGU-24. In order to determine
the body core temperature, one component of the sensor registers the surface temperature
near the surface of the subject; a second measures the heat flow to the environment. The
body core temperature is continuously determined from the two measured values.
Note: The TcoreTM* temperature sensor TTC-05 is equipped with a micro plug connector. The
adapter ATCM-02 or ATCM-42 or the HealthLab TcoreTM* ANT + transmitter module TCFU-
24 is required to connect to the HealthLab Monitoring System.

* TcoreTM is a trademark of Drägerwerk AG & Co. KGaA

Links on further documents:
Hardware: Master HFM-01
Software: Heally Control https://secure.turboj.de/documents/Heally5_en.pdf

 

Back to overview

TechniCAL DATA

Designation HealthLab TcoreTM Temperature Sensor
TTC-08 – Micro Plug Connector
(Continuous Temperature Sensor TcoreTM *)
Data Capturing Measuring range: 25 °C ... 45 °C Accuracy: +/- 0.1 °C
Application information Latex free
Voltage rating: 250 V
Exchange interval: 24 h
Maximum storage time: 2 years
Climatic Conditions acc. to DIN EN 60204-1 ( 05-2010 )
Ambient Temperature operation: -40 … +80 °C
transport / storage: -40 … +80 °C
Humidity / Altitude 20 … 90 % RH ( without condensation )
up to 8.000 m
Dimensions cable length: approx. 550 mm
weight : approx. 4 g
Sensor element L x W x H: 75 x 50 x 8 mm
Download PDF

db Datasheet

Ordering Information

TTC-08 Temperature Sensor:
( TcoreTM * Continuous-
Temperature Sensor ): E1967

Accessory

ATCM-02 Adapter
(Connection to HFM-01, SAT-25): KC0316


ATCM-42 Adapter
(Connection to HFM-05): KC0330


TCFU-24
ANT+ Radio Module: E1957